Skip to product information
1 of 13

DC Sports

DC Sports Single Exit Y-Pipe Back Exhaust System - Nissan 370Z Z34

Regular price $259.99
Regular price Sale price $259.99
Sale Sold out
Shipping calculated at checkout.
Option

Bolt on some aggressive sounds & increase performance with our DC Sports 3" Catback Exhaust System for the 370z! Made from high quality, brushed, mandrel bent, 3" (76mm) T-304 Stainless Steel Piping, with a polish race inspired muffler and finished off with a 4.5" stainless tip that is available in multiple finishes (Polished/Burnt). Our 3" exhaust is system is designed for maximum ground clearance and bolts directly to all your OEM y pipe.

Single Canister Exhaust system
Made from 100% Mandrel Bent T-304
Fully Tig welded
Direct bolt on fitment
3" 16 gauge Piping (76mm)
4.5" tip (114 mm)
Available in polished, burnt finish, & black
12-month warranty

VEHICLE FITMENT

2009 - 2020 Nissan 370Z 3.7L  

Note: Will fit G37/Q60 VHR models with an 8” or longer extension piece


INSTALL GUIDE

1. Utilizing a flat work area (preferably on concrete), jack up the car and support the car on jack stands under the frame support points. (Refer to your owner’s manual) DO NOT USE THE JACK TO SUPPORT THE CAR WHILE WORKING UNDERNEATH! 
2. Remove the four nuts holding the muffler piece to the mid pipes. 
3. Using an exhaust hanger removal tool remove the 3 rubber hangers holding the muffler piece to the car. 
4. Remove the 2 nuts holding the mid pipe to the y pipe. 
5. Use the exhaust hanger removal tool to remove the 2-rubber hangers holding the mid pipes to the car. 
6. Install DC Sports mid pipe onto y pipe. Make sure to use provided gasket. Hand tighten the nuts to the y pipe studs. 
7. Install the muffler rubber hanger onto the DC sports muffler piece. 
8. Slide exhaust clamp onto the end of the mid pipe. 
9. Install muffler piece onto car by inserting rubber hanger onto car’s hanger and making sure the exhaust pipe slips into the mid pipe. 
10. Insert rubber hanger onto the DC Sports mid pipe and tighten the nuts from the mid pipe to the y pipe. 
11. Make sure mid pipe or muffler piece do not rub on anything and tighten down exhaust clamp. 
12. RECHECK ALL YOUR WORK. If exhaust system looks off loosen clamps and adjust. Tighten clamps back down afterward. 
13. Lower the car off the jack stands and start the engine and check for exhaust leaks. 
14. After approximately 500 miles (800km) re-check the exhaust system bolts and nuts and tighten as necessary  

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

‍‍‍‍‍‍‍‍‍‍

Have a Question About This Product?

A VQplug Specialist Will Reply Via Email and Respond Within 24 Hours

Ask a Question